利用气动式溜车—管路系统实现散状物料的输送

气动式溜车－管路系统是近年来兴起的一种高效的中，长距，离输送装置，它克服了常规运输系统运费高，噪声大和污染环境的缺点，在工程上有着良好的应用前景。本文对该系统的原理和原理和结构进行了较为细致的分析，并介绍了一个应用实例。     

二值箝位电路的理论分析及仿真研究

在CCD焦面驱动电路设计中，经常要求产生在两个指定电平间振荡的信号，二值箝位电路以其简单的拓扑结构、稳定的性能表现而得到应用。尽管二值箝位电路的稳态输出仅受拓扑结构影响，而与初始条件无关，然而其暂态输出会随着初始条件以及拓扑结构的不同而有所差异，造成二值箝位电路设计及其应用的复杂性，文章深入地研究二值箝位电路不同的拓扑结构以及不同的输入条件对其输出的影响，给出了各种情况下的仿真结果，并针对仿真结果给出了定量和定性的分析。     

7715D钛合金无中间层扩散焊接头组织及性能研究

采用无中间层的扩散焊接方法进行7715D钛合金连接,在不同焊接温度、扩散压力、保温时间等参数条件下进行工艺试验,分析工艺参数对接头组织和性能的影响.优选的扩散焊工艺参数为焊接海床1 193 K,扩散压力5 Mpa,保湿时间120 min,其接头抗拉强度可达653MPa.     

Adaptive Gaussian sum squared-root cubature Kalman filter with split-merge scheme for state estimation

The paper deals with state estimation problem of nonlinear non-Gaussian discrete dynamic systems for improvement of accuracy and consistency. An efficient new algorithm called the adaptive Gaussian-sum square-root cubature Kalman filter（AGSSCKF） with a split-merge scheme is proposed. It is developed based on the squared-root extension of newly introduced cubature Kalman filter（SCKF） and is built within a Gaussian-sum framework. Based on the condition that the probability density functions of process noises and initial state are denoted by a Gaussian sum using optimization method, a bank of SCKF are used as the sub-filters to estimate state of system with the corresponding weights respectively, which is adaptively updated. The new algorithm consists of an adaptive splitting and merging procedure according to a proposed split-decision model based on the nonlinearity degree of measurement. The results of two simulation scenarios（one-dimensional state estimation and bearings-only tracking） show that the proposed filter demonstrates comparable performance to the particle filter with significantly reduced computational cost.     

量子成像技术前沿进展与展望

量子成像技术作为一种物像分离、抗干扰能力强的成像技术,自1995年首次在实验上实现以来,现已得到深入的探索和广泛的应用.回顾了量子成像技术的起源及主要发展历程,综述了近8年纠缠光源和经典光源量子成像技术的主要进展,介绍了由光场调制技术而衍生出的单像素成像、单光子扫描成像及非视域成像等量子成像发展趋势,概述了非光子粒子的...     

数控机床铣螺纹用盘形铣刀的近似造型及误差计算

在数控铣床上加工螺纹，需要设计盘形铣刀，本文求导了铣刀宽度计算公式，分析了产生误差的原因，并提出了改进措施。     

热电偶检定系统电测仪器选择的误区

针对目前热电偶检定行业存在的电测仪器的选择问题，对高精度数字电压表的误差进行了概要分析，从而为广大计量检定人员选择符合规程要求的电测仪器提供了参考。     

一种新型测距仪的研制

介绍了一种在中，小范围内，采用激光定位，超声测距的新型测量仪器，该仪器以单片微处理器为核心，对不同的测量距离，采用不同频率的超声波，结合信号处理方法，从而实现０．６～１４ｍ范围内高精度实时测量目标距离，其测量相对误差优于１％。     

Morphology and Frictional Characteristics Under Electrical Currents of Al203/Cu Composites Prepared by Internal Oxidation

Two AhO3/Cu composites containing 0.24 wt.% A1203 and 0.60 wt.% A1203 separately are prepared by internal oxidation.Effectsof sliding speed and pressure on the fi-ictional characteristics of the composites and copper against brass are investigated and compared.The changes in morphology of the sliding surface and subsurface are examined with scanning electron microscope (SEM) and energy dispersive X-ray spectrum (EDS).The results show that the wear resistance of the AI203/Cu composites is superior to that of copperunder the same conditions.Under a given electrical current,the wear rate of AI203/Cu composites decreases as the AleO3-content increases.However,the wear rates of the Al203/Cu composites and copper increase as the sliding speed and pressure increase under drysliding condition.The main wear mechanisms for AleO3/Cu composites are of abrasion and adhesion;for copper,it is adhesion,although wear by oxidation and electrical erosion can also be observed as the speed and pressure rise.